0345 200 2828

Small ESD grip seal bag features

• Resealable grip seal static-shielding bag.
• Protects sensitive electronic components from an electrostatic discharge (ESD) outside an Electrostatic Protected Area (EPA).
• Comprehensively tested to exceed industry standards (ANSI/ESD S541, EIA 625) and to be ANSI/ESD S20.20 programme compliant.
• Composed of an internal polyethylene layer, a conductive metallised polyester layer and an external antistatic abrasion-resistant lacquer.
• Creates a 'Faraday cage' around the product, which carries electricity generated by an ESD around the metal bag rather than through it.
• Allows expensive components such as printed circuit boards (PCBs) to be protected in transit or storage.
• Pre-printed ESD notice.
• Semi-transparent so contents can be easily identified.
• Surface resistance of 10^8 - 10^11 ohms per square.

Small ESD grip seal bag sizes

• Internal width: 75mm (3")
• Internal length: 75mm (3")
• Polythene thickness: 70 micron (280 gauge)
• Box quantity: 100 bags

See also: Pink anti-static grip seal bags

If you are packing non-static-sensitive items (e.g. screws or washers), try our range of pink antistatic grip seal bags, which prevent tribocharging and are suitable for introducing to an ESD Protected Area (EPA).