ESD1824GRIP
Grip Seal ESD Shielding Bag - Large
457mm x 610mm x 70 micron (18" x 24" x 280 gauge)
Large Resealable Grip Seal Metallised ESD Shielding Bag. Boxed in 100's.
|
|
(Inc. VAT) |
(Ex. VAT) |
(Ex. VAT) |
100+
|
100 |
£108.00 |
£90.00 |
£900.00 |
500+
|
100 |
£101.30 |
£84.41 |
£844.10 |
1000+
|
100 |
£96.98 |
£80.81 |
£808.10 |
2500+
|
100 |
£93.28 |
£77.73 |
£777.30 |
Large ESD grip seal bag features
- Static-shield bag with resealable grip seal.
- Protects sensitive electronic components from static shock damage outside an Electrostatic Protected Area (EPA).
- Exceeds ANSI/ESD S541, EIA 625 industry standards and ANSI/ESD S20.20 programme compliant.
- 3 layers: (i) polythene (inner), (ii) conductive metallised polyester (middle); (iii) antistatic abrasion-resistant lacquer (outer).
- Bag contents protected by a 'Faraday cage' that carries any potential static electricity around the bag, rather than through it.
- Provides protection for expensive components (e.g. printed circuit boards, mother boards) in transit or storage.
- Features standout yellow printed ESD notice.
- Identify bag contents through semi-transparent bag.
- Surface resistance: 10^8 - 10^11 ohms/square (static-dissipative range).
Large ESD grip seal bag sizes
- Internal width: 457mm (18")
- Internal length: 610mm (24")
- Polythene thickness: 70 micron (280 gauge)
- Bags per box: 100
Do you need resealable pink antistatic grip seal bags?
Looking for antistatic bags to pack items that are not sensitive to static electricity themselves, but may come into contact with items that are (e.g. screws or washers)? Try our range of pink antistatic grip seal bags, which prevent tribocharging and are suitable for introducing to an ESD Protected Area (EPA).
See more sizes in this range
This product also appears in: